fbpx

Cat® C13 Industrial Power Unit

Overview

The Cat® C13Industrial Power Unit is offered in ratings ranging from 287-388 bkW (385-520 bhp) @ 1800-2100 rpm. Conveniently pre-configured for a wide range of applications, the Cat® Industrial Power Unit is a complete power package containing a radiator, flywheel, alternator and alternator wiring completely pre-assembled for fast, straightforward installation in a number of OEM, customer and packager applications. These fuel efficient units are ready made for irrigation, industrial, mining and other pump applications.

Cat® C13 Industrial Power Unit - Specifications

Power Rating
Minimum Power
385 BHP
287 bkW
Maximum Power
520 BHP
388 bkW
Rated Speed
1800-2100 rpm
Emission Standards
Emissions
U.S. EPA Tier 4 Final, EU Stage V, Japan 2014 and Korea Tier 4 Final emissions standards
General
Engine Configuration
Inline 6, 4-Stroke-Cycle Diesel
Bore
130 mm (5.12 in)
Stroke
157 mm (6.18 in)
Displacement
12.5 L (762.8 in³)
Aspiration
Turbocharged Aftercooled (TA)
Compression Ratio
17:1
Rotation from Flywheel End
Counterclockwise
Cooling System - Capacity
60.7 L (64.2 qt)
Lube System - Refill
34 L (35.9 qt)
PETU Dimensions - Tier 4 Final, Stage IV Only
Height
551 mm (21.7 in)
Width
287 mm (11.3 in)
Weight
19.42 mm (42.8 lb)
Volume Capacity
48.4 L (51.1 qt)
Length
854 mm (33.6 in)
Passive Regeneration System Aftertreatment Dimensions - Approximate
Length
974.8 mm (38.4 in)
Height
547.2 mm (21.5 in)
Weight
140 kg (308.6 lb)
Width
958.3 mm (37.7 in)
Power Unit Dimensions - Approximate
Weight - Approximate, Net Dry - Standard Configuration Without Oil, Cooling, Clutch, Compressor, A/C
2085-2304 kg (4596-5080 lb)
Width
1157-1247 mm (45.6-49 in)
Length
2085-2122 mm (82.1-83.5 in)
Height
1928-2082 mm (75.9-81.97 in)
Cat Regeneration System Aftertreatment Dimensions - Approximate
Width
779.8-1069 mm (30.7-42.1 in)
Weight
248-259 kg (547-571 lb)
Height
451.3-654 mm (17.8-25.7 in)
Diameter
330.2 mm (13 in)