fbpx

D6T (Tier 4 Final, Stage IV) - Specifications

Engine
Engine Model
Cat C9.3 ACERT™
Flywheel Power
215 HP
161 kW
Displacement
567 in³
9.3 l
Note (3)
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.8 kg of refrigerant which has a CO2 equivalent of 2.574 metric tonnes.
Note (2)
Diesel Exhaust Fluid (DEF) used in Cat Selective Catalytic Reduction (SCR) systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241.
Note (1)
All non-road Tier 4 Interim and Final, Stage IIIB and IV, and Korea Tier 4 diesel engines are required to use only Ultra Low Sulfur Diesel (ULSD) fuels containing 15 ppm EPA/10 ppm EU (mg/kg) sulfur or less. Biodiesel blends up to B20 (20% blend by volume) are acceptable when blended with 15 ppm (mg/kg) sulfur or less ULSD. B20 should meet ASTM D7467 specification (biodiesel blend stock should meet Cat biodiesel spec, ASTM D6751 or EN 14214). Cat DEO-ULS™ or oils that meet the Cat ECF-3, API CJ-4, and ACEA E9 specification are required. Consult your OMM for further machine specific fuel recommendations.
Net Power - Maximum - ISO 9249/SAE J1349 (DIN) at 1,200 rpm
248 HP
182 kW
Net Power - Maximum - ISO 9249/SAE J1349 at 1,200 rpm
245 HP
183 kW
Net Power - 2,200 rpm - ISO 9249/SAE J1349 (DIN)
218 HP
160 kW
Net Power - 2,200 rpm - ISO 9249/SAE J1349
215 HP
161 kW
Emissions
U.S. EPA Tier 4 Final/EU Stage IV/Korea Tier 4 Final
Build Number
19
Weights
Operating Weight
47139 lb
21382 kg
Service Refill Capacities
Fuel Tank
97.2 gal (US)
368 l
DEF Tank
4.5 gal (US)
17.1 l
Dimensions - XW
Ground Clearance
14.8 in
375 mm
Length - Basic Tractor(2)
13.81 ft
4210 mm
Ground Pressure (ISO 16754)(3)
6.6 psi
45.8 kPa
Machine Height - To Product Link Antenna(1)
10.67 ft
3253 mm
Length - Track on Ground
9.23 ft
2814 mm
Width - Tractor - Without Trunnions - Standard Track
9.16 ft
2792 mm
Note (3)
(3) All dimensions above with Heavy Duty undercarriage. XL and XW with SU blade, LGP with S blade with no rear attachments unless otherwise specified and calculated per ISO 16754.
Note (2)
(2) Add 218 mm for drawbar. Add 1387 mm/1291 mm for ripper on short track roller frame and long track roller frame machines respectively.
Note (1)
(1) Height measured from ground line. Add grouser height for total dimension on hard surfaces. When Cat GRADE with 3D antennas are installed, overall machine height increases by approximately 82 mm.
Dimensions - XL VPAT
Width - Tractor - Without Trunnions - Standard Track
8.91 ft
2717 mm
Note (3)
(3) All dimensions above with Heavy Duty undercarriage. XL and XW with SU blade, LGP with S blade with no rear attachments unless otherwise specified and calculated per ISO 16754.
Note (2)
(2) Add 218 mm for drawbar. Add 1387 mm/1291 mm for ripper on short track roller frame and long track roller frame machines respectively.
Note (1)
(1) Height measured from ground line. Add grouser height for total dimension on hard surfaces. When Cat GRADE with 3D antennas are installed, overall machine height increases by approximately 82 mm.
Machine Height - To Product Link Antenna(1)
10.67 ft
3253 mm
Length - Track on Ground
9.23 ft
2814 mm
Length - Basic Tractor(2)
16.06 ft
4894 mm
Ground Pressure (ISO 16754)(3)
9.8 psi
67.4 kPa
Ground Clearance
14.8 in
375 mm
Dimensions - XL Narrow
Note (1)
(1) Height measured from ground line. Add grouser height for total dimension on hard surfaces. When Cat GRADE with 3D antennas are installed, overall machine height increases by approximately 82 mm.
Width - Tractor - Without Trunnions - Standard Track
8.01 ft
2440 mm
Note (3)
(3) All dimensions above with Heavy Duty undercarriage. XL and XW with SU blade, LGP with S blade with no rear attachments unless otherwise specified and calculated per ISO 16754.
Note (2)
(2) Add 218 mm for drawbar. Add 1387 mm/1291 mm for ripper on short track roller frame and long track roller frame machines respectively.
Length - Track on Ground
9.23 ft
2814 mm
Machine Height - To Product Link Antenna(1)
10.67 ft
3253 mm
Length - Basic Tractor(2)
13.81 ft
4210 mm
Ground Pressure (ISO 16754)(3)
9.4 psi
64.5 kPa
Ground Clearance
14.8 in
375 mm
Dimensions - XL Fine Grading
Width - Tractor - Without Trunnions - Standard Track
8.01 ft
2440 mm
Note (3)
(3) All dimensions above with Heavy Duty undercarriage. XL and XW with SU blade, LGP with S blade with no rear attachments unless otherwise specified and calculated per ISO 16754.
Note (2)
(2) Add 218 mm for drawbar. Add 1387 mm/1291 mm for ripper on short track roller frame and long track roller frame machines respectively.
Note (1)
(1) Height measured from ground line. Add grouser height for total dimension on hard surfaces. When Cat GRADE with 3D antennas are installed, overall machine height increases by approximately 82 mm.
Machine Height - To Product Link Antenna(1)
10.67 ft
3253 mm
Length - Track on Ground
9.23 ft
2814 mm
Length - Basic Tractor(2)
13.81 ft
4210 mm
Ground Pressure (ISO 16754)(3)
9.4 psi
64.7 kPa
Ground Clearance
14.8 in
375 mm
Dimensions - XL
Width - Tractor - Without Trunnions - Standard Track
8.01 ft
2440 mm
Note (3)
(3) All dimensions above with Heavy Duty undercarriage. XL and XW with SU blade, LGP with S blade with no rear attachments unless otherwise specified and calculated per ISO 16754.
Machine Height - To Product Link Antenna(1)
10.67 ft
3253 mm
Note (2)
(2) Add 218 mm for drawbar. Add 1387 mm/1291 mm for ripper on short track roller frame and long track roller frame machines respectively.
Note (1)
(1) Height measured from ground line. Add grouser height for total dimension on hard surfaces. When Cat GRADE with 3D antennas are installed, overall machine height increases by approximately 82 mm.
Length - Track on Ground
9.23 ft
2814 mm
Length - Basic Tractor(2)
13.81 ft
4210 mm
Ground Pressure (ISO 16754)(3)
8.7 psi
59.7 kPa
Ground Clearance
14.8 in
375 mm
Dimensions - XW VPAT Foldable
Length - Basic Tractor(2)
16.41 ft
5002 mm
Width - Tractor - Without Trunnions - Standard Track
9.83 ft
2996 mm
Note (3)
(3) All dimensions above with Heavy Duty undercarriage. XL and XW with SU blade, LGP with S blade with no rear attachments unless otherwise specified and calculated per ISO 16754.
Note (2)
(2) Add 218 mm for drawbar. Add 1387 mm/1291 mm for ripper on short track roller frame and long track roller frame machines respectively.
Note (1)
(1) Height measured from ground line. Add grouser height for total dimension on hard surfaces. When Cat GRADE with 3D antennas are installed, overall machine height increases by approximately 82 mm.
Machine Height - To Product Link Antenna(1)
10.84 ft
3303 mm
Length - Track on Ground
10.65 ft
3245 mm
Ground Pressure (ISO 16754)(3)
7.5 psi
52 kPa
Ground Clearance
16 in
406 mm
Operating Weights
Note
Operating weight includes blade, lubricants, coolant, full fuel tank, standard track, ROPS/FOPS cab, drawbar and operator.
LGP VPAT - With Foldable Blade
59333 lb
26913 kg
LGP VPAT
54527 lb
24733 kg
XW VPAT - With Foldable Blade
58852 lb
26695 kg
XW VPAT
54046 lb
24515 kg
XW SU
48910 lb
22185 kg
XL VPAT
53043 lb
24060 kg
XL SU
47139 lb
21382 kg
XL Narrow
49780 lb
22580 kg
XL Fine Grading
49935 lb
22650 kg
LGP S
51366 lb
23299 kg
Note (1)
(1) Height measured from ground line. Add grouser height for total dimension on hard surfaces. When Cat GRADE with 3D antennas are installed, overall machine height increases by approximately 82 mm.
Note (2)
(2) Add 218 mm for drawbar. Add 1387 mm/1291 mm for ripper on short track roller frame and long track roller frame machines respectively.
Dimensions - XW VPAT
Width - Tractor - Without Trunnions - Standard Track
9.83 ft
2996 mm
Note (3)
(3) All dimensions above with Heavy Duty undercarriage. XL and XW with SU blade, LGP with S blade with no rear attachments unless otherwise specified and calculated per ISO 16754.
Note (2)
(2) Add 218 mm for drawbar. Add 1387 mm/1291 mm for ripper on short track roller frame and long track roller frame machines respectively.
Note (1)
(1) Height measured from ground line. Add grouser height for total dimension on hard surfaces. When Cat GRADE with 3D antennas are installed, overall machine height increases by approximately 82 mm.
Machine Height - To Product Link Antenna(1)
10.84 ft
3303 mm
Length - Track on Ground
10.65 ft
3245 mm
Length - Basic Tractor(2)
16.41 ft
5002 mm
Ground Pressure (ISO 16754)(3)
6.9 psi
47.7 kPa
Ground Clearance
16 in
406 mm
Blades - Capacity
6 SU - XL
7.26 yd³
5.55 m³
Note
*Not available in all areas.
6 VPAT - LGP Foldable
7.83 yd³
5.99 m³
6 VPAT - XW Foldable
7.83 yd³
5.99 m³
6 VPAT - XW
6.57 yd³
5.02 m³
6 VPAT - XL
6.07 yd³
4.64 m³
6 VPAT - LGP
6.57 yd³
5.02 m³
6 SU - XW
7.38 yd³
5.64 m³
6 SU - XL Narrow*
6.47 yd³
4.95 m³
6 S - LGP
4.96 yd³
3.79 m³
Blades - Width
6 VPAT - LGP
13.65 ft
4160 mm
6 SU - XW
11.69 ft
3562 mm
6 SU - XL Narrow*
9.81 ft
2990 mm
6 SU - XL
10.7 ft
3261 mm
6 S - LGP
13.33 ft
4063 mm
6 VPAT - XL
12.75 ft
3880 mm
6 VPAT - LGP Foldable
12.65 ft
3856 mm
6 VPAT - XW
13.65 ft
4160 mm
6 VPAT - XW Foldable
12.65 ft
3856 mm
Note
*Not available in all areas.
Dimensions - LGP VPAT
Note (3)
(3) All dimensions above with Heavy Duty undercarriage. XL and XW with SU blade, LGP with S blade with no rear attachments unless otherwise specified and calculated per ISO 16754.
Width - Tractor - Without Trunnions - Standard Track
10.31 ft
3143 mm
Note (2)
(2) Add 218 mm for drawbar. Add 1387 mm/1291 mm for ripper on short track roller frame and long track roller frame machines respectively.
Note (1)
(1) Height measured from ground line. Add grouser height for total dimension on hard surfaces. When Cat GRADE with 3D antennas are installed, overall machine height increases by approximately 82 mm.
Machine Height - To Product Link Antenna(1)
10.84 ft
3303 mm
Length - Track on Ground
10.65 ft
3245 mm
Length - Basic Tractor(2)
16.41 ft
5002 mm
Ground Pressure (ISO 16754)(3)
6.3 psi
43.3 kPa
Ground Clearance
16 in
406 mm
Dimensions - LGP VPAT Foldable
Width - Tractor - Without Trunnions - Standard Track
10.31 ft
3143 mm
Note (3)
(3) All dimensions above with Heavy Duty undercarriage. XL and XW with SU blade, LGP with S blade with no rear attachments unless otherwise specified and calculated per ISO 16754.
Note (2)
(2) Add 218 mm for drawbar. Add 1387 mm/1291 mm for ripper on short track roller frame and long track roller frame machines respectively.
Note (1)
(1) Height measured from ground line. Add grouser height for total dimension on hard surfaces. When Cat GRADE with 3D antennas are installed, overall machine height increases by approximately 82 mm.
Machine Height - To Product Link Antenna(1)
10.84 ft
3303 mm
Length - Track on Ground
10.65 ft
3245 mm
Length - Basic Tractor(2)
16.41 ft
5002 mm
Ground Pressure (ISO 16754)(3)
6.8 psi
47.2 kPa
Ground Clearance
16 in
406 mm
Dimensions - LGP
Width - Tractor - Without Trunnions - Standard Track
10.5 ft
3201 mm
Note (3)
(3) All dimensions above with Heavy Duty undercarriage. XL and XW with SU blade, LGP with S blade with no rear attachments unless otherwise specified and calculated per ISO 16754.
Machine Height - To Product Link Antenna(1)
10.84 ft
3303 mm
Length - Track on Ground
10.65 ft
3245 mm
Length - Basic Tractor(2)
14.48 ft
4415 mm
Ground Pressure (ISO 16754)(3)
5.1 psi
35.2 kPa
Ground Clearance
16 in
406 mm